Average Cost For Retaining Wall

Average Cost For Retaining Wall – A Retaining Wall is, in any case, a worthwhile purchase. It can delimit, support, integrate with a planting or dominate as a solid masonry. It is always a cost-intensive but long-term investment.

What Does Average Cost For Retaining Wall?

Retaining Wall is a symbol of naturalness and value. Our calculation example will help you to estimate the cost of a natural stone wall properly.

Retaining Wall Types Overview

Retaining Wall are built in four different basic types:

  • As a leaning wall on a slope or raised bed etc. in dry laying
  • As a leaning wall on a slope or a raised bed, etc. with a solid brickwork
  • As a freestanding wall with a solid brickwork or as a
  • Freestanding wall in Dry Laying

Given the high material weight, the latter is, however, statically unacceptable and can only be used with low natural stone walls. Natural stone walls in dry laying have the advantage that they can be designed very naturally through integrated plantings. On the other hand, hard-clad natural stone walls ensure a high degree of stability and, with appropriate design, provide adequate protection against slipping soil.

Average Cost For Retaining Wall Example

The largest cost factor is the Retaining Wall. But also there are differences. Condensed stones are, of course, more expensive than rupture stones and also the type of rock determines the price.

As a calculation example, a free-standing natural stone wall with hewn limestones, average edge dimensions 10x10x25cm, and a meter wall height. At a length of five meters, a wall surface of 2x5qm = 10sqm.

Average Cost For Retaining Wall Overview:

  • 10 square meters of treated limestones = 950.00 Euro
  • Backfill of Grobkies 1,5 cubic meters = 60,00 Euro
  • Prefabricated concrete 2.5 cubic meters = 175.00 Euro
  • Material transports at a flat rate of 150.00 Euro
  • Baggermiete 1 day = 100,00 Euro
  • Baggermiete 1 day alternatively with equipment = 320,00 Euro

The result:

  • This kind of wall costs five meters in length: circa 1,450.00 Euro
  • In self-service but with equipment: approx. 1,670.00 Euro

Uninhabited and carved natural stones are found not only in the natural stone trade but also directly from the quarry. However, this is not expected in square meters, but in tons. If you want to make sure and do not want to buy too much or too little (two means of transport also cause transport costs twice), you should convert the square meters into tons.

Hints and Tips

  • Force discussion on cost calculation
  • Instructions for building a Retaining Wall
  • Pictures of the construction of a Retaining Wall
  • Historical information about Retaining Wall

To calculate the square meters in tons (example)

  • In the case mentioned, the average edge dimension of the hewn limestones was 10 × 10 × 25 cm.
  • For a wall height of 1m, you need 4 × 10 = 40 stones per square meter.
  • The length of the wall is 5m, thus 5 × 40 = 200 stones.
  • Since you have two faces in a free wall, you must double. You need a total of 400 stones.
  • Weigh an average large stone and multiply this weight by 400 and you get the total weight in kilograms, divided by 1,000 = tons.

For unhewn stones the calculation is the same, but with an average large rock.

Specialist company or self-service?

The construction of such a natural stone wall is associated with a significant amount of effort and knowledge from the masonry trade. Errors, especially in the case of a non-binding joint offset, leading to an unfortunate result of a considerable investment.

Landscaping and Landscaping

If you do not trust yourself in this work, you can also hire a specialist company. The contact persons for this are, above all, the plants from the garden and landscaping sector. But also some road construction companies have developed this task area.

Get Tips from the Neighborhood

Sure, the Yellow Pages are suitable to find such a company in the vicinity. However, it is more advisable to look at natural stone walls in your neighborhood or close vicinity. Here you will find many tips on recommendable companies. Get about three offers from these companies, and you will find your favored specialist company, who is happy about your order. Starting from the previous calculation example, the total costs are about 2,700.00 euro.

This will Save you Money

As everywhere, construction and specialist markets are not always the most cost-effective suppliers.

Directly from the Quarry

If you want to achieve a savings effect, you can also go directly to a quarrying company, or you can get used basalt pavement from a road construction company. Here, you will not get your stone material sorted so thoroughly, but if you work with an optically visible joint, you will achieve an equally high-quality result.

Cheap Rock Styles

The selection of the rock also determines the price. Granite is more expensive than quartzite, and hewn stones are more expensive than rupture stones. From all these materials, however, successful natural stone walls can be built.

What you should take into account when installing

The most important rule is that natural stone walls from a height of two meters require a static calculation and building permit. Regarding all other aspects, the regulations in the state building regulations of the respective federal states are regulated differently. Especially about the distance to the neighbor, it is always cheaper to ask the building authorities.

Average Cost For Retaining Wall

Interlocking Concrete Block Retaining Wall
Interlocking Concrete Block Retaining Wall

Related Post

error: Content is protected !!