Check out this short and practical instructions on how to create a retaining wall in the garden can build itself. You want to have the perfect backyard, but the reason to be a bit steeply? Do not worry. This retaining wall will provide enough space for all garden tasks.
How To Create A Retaining Wall In The Garden – What To Consider
If a retaining wall in the garden want to build in stone, you should consider certain things. Prepare yourself for a relatively heavy physical work ahead, because the stone blocks are usually quite heavy. It depends on the position of the retaining wall, whether you will need professional help in building or not. Think very carefully before you start building, if you can pull yourself.
How To Create A Retaining Wall In The Garden
Step 1: The Foundation Dig
If you opt for a straight retaining wall in the garden have decided to insert two wooden stakes where the beginning and the end of the wall is supposed to be and stretch a thread between them. The thread should the top of the wall and actually denote parallel to the actual construction are. In this way you will be sure that the retaining wall is straight. Then you can start with the digging.
Step 2: Determine The Initial Level
The basis is very important for the successful construction of the retaining wall. So you can be sure that the base is flat and straight, you should flatten the first row of stones really good. Insert two wooden stakes into the ground we make it a wooden board. Then measure from the leveling, if the base is straight. Only then can the retaining wall in the garden continue to build.
Step 3: Solidify The Basis Of Well
For this purpose you need a determined soil stabilizer and base material consisting of sand and gravel. Solidifying the first layer of base material, then make it even more and repeat the whole process again. Do this until the level reaches the tops of the stakes. Then you’re ready for the next step and to the retaining wall in the garden continue to build.
Step 4: The Base Material Using Flatten On A Wooden Board
Step 5: The First Stones Using Leveling And Rubber Mallet Insert
Step 6: The Stone Blocks Stack With Adhesive Bonding Agent
Step 7: Inserting Gravel As Filling Material
Step 8: Covering The Retaining Wall For A Complete Look